Keep your eye on the bobbin as it fills, do not allow thread to wind beyond the outside FULL ring. Pull thread in away after it has separated from bobbin. Start the machine, running it at a moderate speed. ![]() Draw needle thread back between toes of presser foot, under left side of presser foot, then up, into and around thread retainer, as shown. Move bobbin latch to right (wind position). If pattern selector release lever fails to lock into place, turn the hand wheel slightly towards you and then reset lever. Set pattern selector release lever by turning it clockwise and set stitch control dials for straight stitch stitch pattern needle position center and stitch width. Open slide plate and make sure bobbin is empty. Raise the presser foot to release tension discs. Raise the take-up lever to its highest position by pressing lightly on the speed controller or by turning the hand will toward you. The window in the slide plate lets you see the bobbin thread supply at a glance, to help avoid running out of thread in the middle of a seam. If the bobbin runs out of thread during sewing, you can rewind it without removing it from the machine. To open slide plate, simply draw a gently towards you. Winding the bobbin – Singer 900 Futura Sewing Machine Instruction Manual You will find a bobbin in place under the slide plate of your machine. ![]() Singer 900 Futura Sewing Machine Instruction Manual.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |